(Your shopping cart is empty)
Search 

Join our mailing list!


  Home > ALL PRODUCTS >

  ESS Fire Suppression Systems
 
 
ESS brings you a complete packaged & simplest to install fire suppression system on the market today. ESS is more economical and the only system that can be REFILLED/RE-CHARGED at the racetrack or the shop by you in minutes! ESS puts you back in the race faster and easier than any other system! Circle Track,Drag Racing,Road Racing,Off Road, Street Rods, for gasoline or alcohol fires. Every component of race car safety equipment is important. Do not neglect the fire protection aspect!
ESS 2.3 & 5.0 LTR systems are available as a non-pressurized system or a pressurized SFI approved system !!


List Price: $413.00
System Price: $399.00
You save $14.00!


Product Code: FCFSS

ESSFS

ESS Fire Systems:
  

 
Features Size & Install Information
 
Features
  • The 2.3 liter system is approved by SCCA, NASA, PCA, BMW Club, and others for competition and track days. This is a 3 nozzle system utilizing our T-style nozzle design, a bulkhead tee fitting for two nozzle coverage of the engine compartment, all fittings, stainless steel mounting brackets, pull cable activation, our re-designed pull cable mounting bracket for easy installation, 10 ft. aluminum tubing, and detailed instructions
  • This system is a two zone system. It is designed to give protection to two zones in the event of a fire - most commonly the driver and the engine. In place of the engine the fuel cell could be the second zone.
  • Key Benefits
  • Excellent coverage through the use of the new T-style nozzles
  • Field rechargeable in under a half hour
  • Easy to remove for technical inspection
  • Included Parts
  • Spun cast aluminum cylinder Aluminum 3 port head
  • Slotted pull cable bracket Adjustable length pull cable
  • Safety cup and pin for pull handle Safety pin for cylinder actuator
  • 3 -4 AN to 1/4" NPT head fittings 1 -4 AN bulkhead tee and nut
  • 10 -4 AN nuts and sleeves Insulated "D" clamps
  • 20ft. 1/4" aluminum tubing 4 T-style nozzles
  • 2 Stainless steel t-bolt band mounts with integrated feet Non-fracturing head seal
  • 12 oz. AFFF concentrate Emergency "E" sticker
  • Detailed, illustrated instruction manual
  • The 5.0 liter system is a racing approved system by SCCA, PRO-SCCA, Trans Am, World Speed Challenge, American LeMans, NASA, and others. This is a 4 nozzle, 3 zone system utilizing the newest T-style nozzle, bulkhead fitting, 20 ft of aluminum tubing and the other features of the 2.3 liter system. This system is available as an owner rechargeable system and as a SFI 17.1 compliant system. The SFI 17.1 compliant system requires that the systems be shipped full, sealed, and certified for 2 years of service. We offer a re-certification program for both 17.1 and non-17.1 systems
  • This system was created for the hardcore racer. It is designed to provide three zones of coverage - driver, engine, and fuel cell. The aluminum cylinder and hardware keep down the weight and yet the 5 liters of suppression agent provides better coverage than the competition. The 5 liter system will produce approximately 30 liters of foam when activated, enough to subdue the most stubborn fire. In non SFI 17.1 compliant systems, you clean up with water and can recharge the system at the track with a recharge kit (retail under $70) and fresh water. The SFI 17.1 compliant version of the 5.0 liter system requires that the system be shipped back to us for recertification. We offer a re-certification program for both 17.1 and non-17.1 systems. The stainless steel t-bolt mounting brackets allow easy access for tech inspection and storage during the off season.
  • Contact your sanctioning body if you would like to use this system.
  • Key Benefits
  • Larger coverage area than the 2.3 liter
  • Meets or exceeds most sanctioning body requirements
  • It is also available in AFFF-AR for use on alcohol based fires
  • Included Parts
  • Spun cast aluminum cylinder Aluminum 3 port head
  • Slotted pull cable bracket Adjustable length pull cable
  • Safety cup and pin for pull handle Safety pin for cylinder actuator
  • 3 -4 AN to 1/4" NPT head fittings 1 -4 AN bulkhead tee and nut
  • 10 -4 AN nuts and sleeves Insulated "D" clamps
  • 20ft. 1/4" aluminum tubing 4 T-style nozzles
  • 2 Stainless steel t-bolt band mounts with integrated feet Non-fracturing head seal
  • 12 oz. AFFF concentrate Emergency "E" sticker
  • Detailed, illustrated instruction manual

Related Products...
Impact Auto Racing Helmets
Sale Price: $819.00
Add
Impact Auto Racing Helmet
Impact Auto Racing Helmets
Sale Price: $769.00
Add
Impact Auto Racing Helmet
Shock Doctor Eject Helmet Removal System
Our Price: $59.00
Add
Shock Doctor Eject Helmet Removal System
5 Point Racing Harness
Racing Harness: $109.00
Add
5 Point Racing Harness and Harness Pads
Impact Auto Racing Helmets
Sale Price: $1,350.00
Add
Impact Auto Racing Helmet Carbon Fiber
Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

ALL PRODUCTS
FIRE SYSTEMS